Product Details:
Material | Plastic |
Usage/Application | Hospital |
Color | White, Blue, etc |
Disposability | Disposable |
The main tasks of the expiratory valve sets are to control the respiratory phases and the positive end-expiratory pressure (PEEP). Their design also prevents internal ventilator components from coming into contact with the patient's exhaled gas
Product Details:
With Mask | No |
Available Color | Green Transparent |
Tube Length | 2 ft |
Application | Hospital |
Patient Type | Paediatric, Adult |
Material | Plastic |
Disposability | Disposable |
Capacity | 6 mL |
Most nebulizer systems come with the compressor, nebulizer set (which includes the tubing and mouthpiece), and medication cup. Some also come with masks and/or air filters
Product Details:
Flow Range | 0-160 SLPM |
Disposability | Non Disposable |
Accuracy | 99.99% |
Application | Hospital |
Material | Plastic |
The sterilizable neonatal flow sensor and SpiroLife® combine the advantages of hot-wire technology with the ability to be sterilized, integrating seamlessly into your hospital's sterilization processes. The sterilizable reusable flow sensor for the emergency room is based on the proven principle of differential pressure measurement. Because of its robustness, it is the ideal solution for the special requirements of the emergency room.
Product Details:
Is It Portable | Portable, Wall Mounted |
Operation Mode | Manual |
Usage/Application | Radiography |
System Type | RVG 100 System |
Capacity | 20 lp/mm |
Product Details:
Application | Hospital |
System | 3D |
Unit Type | 2-in-1 unit |
CBCT Type | 3D CBCT |
Quality | 9000 3D Extra |
Product Details:
Application | Hospital |
Brand | Good Health |
Model | GHI |
Color | Grey |
Material | CRCA Steel |
Finishing | Epoxy Powder Coated |
Product Details:
Transducer Type | Mainstream |
Measurment Range | 0-100 mmHg |
Sampling flow rate | >400 mL/min |
Atmospheric Pressure | 0-20 mmHG |
Warm Up Time | 0-1 min |
End-tidal carbon dioxide (ETCO2) is the level of carbon dioxide that is released at the end of an exhaled breath. ETCO2 levels reflect the adequacy with which carbon dioxide (CO2) is carried in the blood back to the lungs and exhaled. Available evidence has established that ETCO2 measurement can provide an indication of cardiac output and pulmonary blood flow.2–4 Non-invasive methods for ETCO2 measurement include capnometry and capnography.
Product Details:
Tube Length | 2 m |
Corrugated Tube Length | 150 mm |
Application | Hospital |
Flow Setting | 200 mL/min |
Material | PVC |
Bain Circuit. A co-axial modification of the basic T-piece system, developed to facilitate scavenging of waste anesthetic gases. Construction. An tube carrying fresh gas (F) travels inside an outer reservoir tube (R) to the endotracheal tube connector
Product Details:
Disposability | Disposable |
Tube Length | 1.5 m |
Patient Type | Adult, Neonatal |
Water Trap | Double |
Application | Hospital |
Steribility | Sterile |
The ventilator circuit is used to deliver gas from a positive pressure ventilator to the patient. It is typically comprised of tubing that is 22 mm of inside diameter, but can be smaller for neonatal and pediatric circuits. A humidifier, a nebulizer for inhaled drug delivery, and gas-monitoring devices such as an oxygen analyzer and a spirometer can be added to the circuit.
Product Details:
Sizes Available | Infant ( S ), Adult (L), Pediatric ( M ) |
Material | Plastic |
Available Color | Green Transparent |
Application | Hospital |
Head Strap | Elastic |
Disposability | Dsiposable |
These masks are specially designed to be placed over the trach stoma and secure round the neck. The mask is connected to an oxygen reservoir with the help of an oxygen tube. The oxygen level is then set to the desired amount. You must always ensure that the mask is not obscuring the tube.
Product Details:
Application | Hospital |
Disposability | Disposable |
Steribility | Non-sterile |
Diameter | 36 mm |
Bacterial Filtration Efficiency (BFE) | 99.99 % |
Viral Filtration Efficiency (VFE) | 99.99 % |
Generally contains a layer of foam or paper embedded with a hydroscopic salt such as calcium chloride
Bacterial and viral filters ideally have filtration efficiency of >99.9%
HME with humidification efficiency >30mg.H2O/L
connects to a standard 15mm connector on an endotracheal tube
Product Details:
Patient Type | Adult, Paediatric |
Color | Green |
Material | Plastic |
Disposability | Disposable |
Steribility | Sterile |
Application | Hospital |
A significant feature of an endotracheal tube holder is stabilization, and this component can help secure the tube place after insertion.
Product Details:
Capacity | 2 to 80 L min |
Alarm Type | Yes |
Patient Type | Adult, Neonatal |
Usage/Application | Hospital |
Warranty | 1 Year |
Material | Plastic |
Respiratory Humidifier Provides the physiological temperature of 37°C with the optimum of 100% relative humidity Maintaining of mucociliary clearance over long periods of time , Secretion liquefaction reduces the risk of tube or cannula occlusion , No increase of dead space or breathing resistance
Product Details:
Application | Filling, Surgical Instruments |
Type of Dental Equipment | Dental Laser, Dental Burs, Elevators, Dental Chair |
Material | Metal, Polymer |
Operation Mode | Manual |
Brand | Kodak |
Product Details:
Application | Hospital |
Available Color | white Transparent |
Temperature | 40 Degree C |
Material | PP |
Bacterial filters are used for sterilization of fluids that may not be heated (solutions of certain medications, sera, nutrient media for microorganisms, and such). The number of microorganisms contained in rivers and other bodies of water may be determined by means of membranous bacterial filters
Product Details:
Model | GHI |
Brand | Good Health inc |
Color | White |
Material | Aluminium, SS |
Product Details:
Usage/Application | Industrial |
Form | Gel |
Packaging Size | 5 ltr |
Packaging Type | Can |